RhinoLite® RhinoFill™ Ready Mixed Crack Filler, is suitable for interior and exterior applications, available in a paste form, has low shrinkage, excellent adhesion and can be applied in layers of up to 5 mm. It can be sanded to a smooth finish.

Key facts

• Suitable for sand/cement, plaster, plaster boards, concrete, stone and other masonry surfaces.
• Can be used straight from the tub.
• It is slump resistant and can be applied in thick layers up to 5 mm.
• Excellent strength, good adhesion and abrasion resistance.

Application

• Use a clean scraper/putty knife.
• Make sure that product is properly mixed.
• Fill the cracks, holes and indentations using a scraper or putty knife.
• Apply in layers from 1mm to 5 mm thick. For deeper cracks, holes or indentations should be done in two or more steps.
• Even out the RhinoLite® RhinoFill™ Ready Mixed Crack Filler while wet to level with the surrounding surface. Best applied when mix is wet.
• Allow to fully dry before sanding, drilling or painting. Drying times are dependent on thickness of application and atmospheric conditions. Apply a universal undercoat before painting.
• Should sanding still be required – use wet 100 grit waterproof sandpaper to obtain the best results.